Xerox DocuPrint 96MX manual IF8401 FIS font request failed with EMT return code

	IFU (INTERPRESS FONT UTILITY) MESSAGES
IF8401	FIS font request failed with EMT return code x
	The FIS font request cannot be processed due to the EMT (emulator
	trap) return code shown.
Action	Contact your systems specialist or Xerox Customer Service.
IF8402	FIS initiation failed with EMT return code x
	Initiation of FIS cannot be processed due to the EMT return code
	shown.
Action	Contact your systems specialist or Xerox Customer Service.
IF8403	FIS termination failed with EMT return code x
	FIS termination cannot be processed due to the EMT return code
	shown.
Action	Contact your systems specialist or Xerox Customer Service.
IF8404	Font set is larger than Font_Set_Array_size limit
	There is not enough memory to process the font set.
Action	Contact your systems specialist or Xerox Customer Service.
IF8405	IPD communication failure; aborting ADD
	IPD communication is not operational. The ADD command has been
	aborted.
Action	Contact your systems specialist or Xerox Customer Service.
IF8406	Incorrect floppy logical unit
	The logical unit assigned to the device does not check out correctly.
Action	1. Retry the command.
	2. If this fails again, reboot the system and retry the command.
IF8408	Missing block header on medium to read
	The text that was just read from the written file on the medium was
	not as expected. The format of the file written by the WRITE
	command is either corrupted, the READ and WRITE codes are not
	being executed synchronically, or a noncopy medium was loaded
	when a READ was attempted.
Action	1. Remount the medium (tape, floppy, etc.), making sure it is the
	correct medium for a READ
	or
	2. Execute the corresponding WRITE command again for the
	READ that failed.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-37