Xerox DocuPrint 96MX manual IF2236 Response was received unsuccessfully

	IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2235	Please confirm deletion of wildcarded Interpress font
	Upon entering the IFU DELETE command, you are asked by the
	system to confirm this operation by entering C to continue or A to
	abort.
Action	Enter C or A as appropriate.
IF2236	Response was received unsuccessfully!
	The operator’s response was not received correctly.
Action	None.
IF2237	Package %0 issued unknown message number %1.
	This is a general error message.
Action	None.
IF2239	Font x already exists on system, renamed to: y.
	During execution of the IFU COPY READ command, the system is
	renaming the indicated font before it copies it onto system disk
	because a font with the same name already exists on system disk.
Action	None.
IF2240	Bad line spacing override value was found in font profile.
	The line spacing override value is not a numerical value in the font
	profile.
Action	1. Make appropriate changes in the font profile.
	2. Retry the ADD command.
IF2241	FISname not in font profile, using name from FIS master.
	The FIS-name parameter in the font profile was omitted. The name
	from the FIS master will be used to create the font.
Action	None.
IF2245	Font or character size exceeds standard format.
	The font file bitmap size exceeds 1 Megabit or one or more
	characters exceed 1024 bits high by 512 bits wide (if viewed in
	portrait orientation).
Action	If your system can utilize the 5-word FST format (with version 3
	software), set the FTYPE parameter in the font profile to
	FTYPE = EXTENDED and retry the ADD process.
	or
	If your system does not have the 5-word FST format, decrease the
	number of characters requested in the CHARS/DCCHARS
	parameter in the font profile and retry the ADD process.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-11