Xerox DocuPrint 96MX manual OS2260 Paper in selected tray too large. Change if desired

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2260	Paper in selected tray too large. Change if desired.
	The paper length guide in the selected tray is set for paper of a larger
	size than that set at mini-sysgen. Printing stops. (This message is
	followed by message OS2000.)
	The printer control console displays:
	OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action	Enter CONTINUE O command, press the Continue button, or press
	the <CON> key to resume printing. All subsequent paper size
	mismatches are then ignored for the rest of the job.
	or

1.Adjust the length guide and load paper of correct size. (Refer to the chapter on feeder trays in your DocuPrint 96/

DocuPrint 96MX LPS Operator Guide.)

2.Enter the CONTINUE O command, press the Continue button, or press the <CON> key to resume printing.

or

3.Enter the ABORT O command to cancel the job.

4.Perform mini-sysgen, if authorized to do so, to change default paper size. (Refer to DocuPrint 96/DocuPrint 96MX LPS System Generation Guide.)

5.Restart the job.

OS2261 Paper in selected tray too small. Change paper.

	The paper length guide in the selected tray is set for paper of a
	smaller size than that specified at mini-sysgen. Printing stops.
	(Message is followed by message OS2000.)
	The printer control console displays:
	OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action	Adjust the length guide and load paper of correct size. (Refer to the
	chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS
	Operator Guide.)

1.Enter the CONTINUE O command, press the Continue button, or press the <CON> key to resume printing.

or

2.Enter the ABORT O command to cancel the job.

3.Perform mini-sysgen to reset paper size. (Refer to the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

4.Restart the job.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-53