Xerox DocuPrint 96MX manual OS1292 Command ignored Main or Aux Cluster not selected

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1291	Cluster name not defined.
	or
	Cluster <cluster-name> ***
	Cluster has no current trays ***
	You have entered a PQA command or a job start command
	containing an undefined cluster or one with no current trays.
Action	1. Verify the clusters to be used for your job.
	2. Reenter the PQA command.
OS1292	Command ignored.
	Main or Aux Cluster not selected
	The FEED command can only cause the system to toggle between
	the MAIN and AUX clusters. Since neither MAIN nor AUX had been
	selected, this command has been ignored.
Action	Enter the name of the specific cluster you wish to select. (Refer to
	your DocuPrint 96/DocuPrint 96MX LPS Operations Reference
	chapter on setting up print jobs for additional information.)
OS1293	Feed Main/Aux not in effect, unable to toggle
	The system is unable to switch (toggle) between the main and
	auxiliary feeder trays.
Action	Check your cluster configuration and enter a new command that will
	allow toggling. (Refer to the chapter on feeder trays in your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference.)
OS1294	Invalid paper tray selected. Command ignored
	A command was entered that refers to a (feeder) tray not in the
	printer configuration, e.g., (feeder) trays 3 and 4 can only be selected
	when your printer has a high-capacity feeder.
Action	Select a (feeder) tray that is part of your printer‘s configuration.
	(Refer to the chapter on feeder trays in your DocuPrint 96/
	DocuPrint 96MX LPS Operator Guide.)
OS1295	Destination trays not configured for this command
	A command was entered that is invalid for the printer‘s stacker tray
	configuration.
Action	Reenter the command, using a stacker bin that your system has.
	(Refer to the output tray or bin chapter in your DocuPrint 96/
	DocuPrint 96MX LPS Operator Guide.)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-23