Xerox DocuPrint 96MX manual OS8855 Invalid form file header, OS8970 Cannot open recovery file

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS8855	Invalid form file header.
	The input task is unable to read a form file header due to software or
	disk/CPU problems. The job will abort.
Action	1.	Recompile the form with the correct file header. (Refer to your
		DocuPrint 96/DocuPrint 96MX LPS Forms Creation Guide.)
	2.	Reload form file to system disk. (Refer to your DocuPrint 96/
		DocuPrint 96MX LPS Operations Reference chapter on
		managing LPS resources for additional information.)
	3.	Restart the job.
OS8860	Page format error. Page will not be printed.
	The job has improper metacodes.
Action	1.	Retry the job.

2.If the message reappears, check the software package that emits the metacodes, to ensure that the level is current.

3.Contact your systems specialist or Xerox Customer Support for assistance, if necessary.

OS8950	Insufficient dynamic memory to run requested task.
	Not enough dynamic memory remains to load the requested task.
	Memory has been reported as inoperable during the system boot, or
	the system disk file of the desired task has been modified.
Action	1. Reboot the system by pressing the Boot button and entering B.
	2. Restart the job.
	3. If the problem continues, resysgen if authorized to do so (refer
	to your DocuPrint 96/DocuPrint 96MX LPS System Generation
	Guide),
	or
	Contact your systems specialist.
OS8960	File management initialization failure - Reboot.
	The system‘s attempt to initialize file management processing has
	failed.
Action	Reboot the system.
OS8970	Cannot open recovery file.
	The automatic job recovery file which contains data necessary to
	recover after a system rollover has been left in a state such that it
	cannot be accessed.
Action	Resysgen the disk to recreate the file (refer to your DocuPrint 96/
	DocuPrint 96MX LPS System Generation Guide),
	or
	Contact your systems specialist.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-121