CARE AND MAINTENANCE

This product, once correctly fitted, will give you years of trouble-free operation. Maximum performance will depend on keeping the filters clean or replacing when they have reached their operational life. Filters must always be fitted to prevent motor damage. The dust container should be emptied when full or when indicated by the light.

Make sure unit is switched off and power cord removed.

TO EMPTY DUST CONTAINER

·There are two clips on either side of the container.

·Place your hand underneath the container to support it and undo the clips.

·Empty container.

·Refit, making sure the clips are fully secured.

TO REPLACE FILTER

Your MD Air Master Central Vacuum System has an efficient HEPA filter fitted for maximum cleaning performance and it should be cleaned when the suction level falls, or when dirty. Follow the same procedures for removing the bottom container. You will see that the HEPA filter is held in place by a locking device.

·Turn anti-clockwise to remove the HEPA filter.

·Tapping the filter or using a soft bristle brush will dislodge dirt.

·To refit or replace a new HEPA filter, replace locking device by turning clockwise.

·Refit bottom section of container making sure clips are fully secured.

FAULTS

Do not continue to use this system if it appears to be faulty or the supply cord is damaged. If a fault cannot be rectified, please return to the location of purchase. If damaged, return the canister for repair to an authorized central vacuum dealer location in order to avoid a safety hazard.

Consult the trouble-shooting guide in this manual if your system fails to operate properly. Contact an authorized dealer if your problem persists.

AFTER USE

Switch the system off and remove the plug from the electricity supply. Always switch off and remove the plug before attaching any accessories or cleaning the system.

.

M.D. Manufacturing

AirMaster

Model C300

 

TROUBLE SHOOTING

 

 

PROBLEM

 

CAUSE

 

REMEDY

 

 

Motor does not start or stops.

 

No power supply.

 

Check cable, plug and

 

 

 

 

socket. If still inoper-

 

 

 

 

ative, contact authorized

 

 

 

 

central vacuum dealer.

 

 

 

 

 

Suction force gradually

 

Dust-container is full,

 

Empty dust-container,

decreases.

 

suction hose, wand is

 

remove objects from

 

 

blocked or dirty filters.

 

hose, wand, replace or

 

 

 

 

clean filters.

Due to our commitment to continuous product improvement and innovation, sometimes the product you buy may differ slightly from the one shown on this product carton.

6

3

Page 2 Page 4
Page 3
Image 3
MD C300 warranty Care and Maintenance, To Empty Dust Container, To Replace Filter, Faults, After USE
Page 2 Page 4

C300 specifications

The MD C300 is a cutting-edge piece of equipment designed for professionals seeking high performance and versatility in their operations. With its advanced features and innovative technologies, the MD C300 stands out in its field and is a favorite among users looking for reliability and efficiency.

One of the main features of the MD C300 is its powerful engine, capable of delivering robust performance in a variety of conditions. This engine is designed for efficiency, providing excellent fuel economy while still delivering the power needed for demanding tasks. The MD C300 is equipped with a state-of-the-art transmission system that ensures smooth gear shifting and optimal power delivery, enhancing the overall driving experience.

The MD C300 also boasts advanced technological integrations that elevate its functionality. One of these is the intelligent control system, which offers real-time feedback on performance metrics and allows users to monitor and adjust settings easily. This feature enhances operational efficiency and helps in identifying any potential issues before they become significant problems.

Moreover, the MD C300 is designed with user comfort and safety in mind. It features an ergonomic cabin layout, providing an intuitive interface with easy access to controls. The seating is designed for long hours of use, reducing fatigue and increasing productivity. Safety is prioritized with features such as stability control, anti-lock braking systems, and an advanced safety cage, all contributing to a secure working environment for operators.

The MD C300 also excels in connectivity, integrating with mobile devices and offering remote monitoring capabilities. This ensures that operators can manage and track their equipment from anywhere, enhancing operational efficiency and maintenance scheduling.

In terms of durability, the MD C300 is built with high-quality materials that withstand harsh working conditions. Its rugged construction is designed for longevity, minimizing downtime and repair costs.

Overall, the MD C300 is an exceptional solution for those requiring a reliable, powerful, and feature-rich piece of machinery. Its combination of performance, technological advancements, safety features, and user-centric design makes it an outstanding choice for professionals across various industries. With the MD C300, operators can be confident that they are equipped with a machine that meets and exceeds their demands, ensuring productivity and efficiency in every task.
Top Page Image Contents