Xerox DocuPrint 96MX Print 1 print one copy of current report, Abort O- abort current report

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS6300		Current report saturates disk. Enter option: “CONTINUE I” -
		continue multicopy mode.
		The report currently being input exceeds the capacity of the print file.
		Select one of the following:
	Action	Enter the CONTINUE I command to resume multicopy printing. Input
		slows, resuming speed when more disk space is freed.
		or
		“PRINT 1” - print one copy of current report
		Enter the PRINT 1 command. The system prints one copy of the
		report.
		or
		“ENDJOB” - print all copies of report so far, end
		Enter the ENDJOB command. All material already in the print file is
		printed; the rest is abandoned.
		or
		“ABORT O”- abort current report
		Enter the ABORT O command. The current report is deleted.
		or
		“ABORT JOB x” - abort current job
		Enter the ABORT job command. The entire job is cancelled.
OS6350		Accounting data may be corrupt.
		An irrecoverable error occurred while the system was updating the
		accounting file. Some information may be lost or inaccurate.
	Action	None.
		Note: While no immediate action is required, the accounting logs
		should be examined carefully if this message appears.
OS6360		Incorrect page sequence detected. Pages will be purged.
		The system has detected a possible problem with the sequence in
		which pages are being printed. All pages in progress will be purged
		and the system will attempt to restart the job at the last known good
		page.
	Action	None.
OS6450		Print file problem due to graphics.
		The page log entry with the graphics specified will not fit in the page
		log sector on the system disk. The job will abort.
	Action	Recreate the job, reducing the amount of graphic data.

6-92 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE