Xerox DocuPrint 96MX OS1380 Alignment is nn Scan Lines and nn Dots, OS1400, Printer idle, OS1401

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1380	Alignment is nn Scan Lines and nn Dots
	Printed data will appear at the indicated number (76-260) of lines
	from the top and bottom edges of paper, and the indicated number
	(0-795) of dots from the right and left edges of paper.
Action	None.
OS1381	Diagnostic alignment is x Scan lines and y Dots
	For Xerox service personnel, this message provides alignment
	information.
Action	None.
OS1390	Invalid Scan or Dot value. Retry Align
	The alignment number entered for dots or lines is not within the
	permitted range.
Action	Reenter the ALIGN command with value(s) within the range. (Refer
	to the problem solving chapter in your DocuPrint 96/DocuPrint 96MX
	LPS Operator Guide.)
OS1391	Invalid Scan or Dot value. Retry DAlign
	For Xerox service personnel, this messages indicates that incorrect
	alignment values have been entered.
Action	None.
OS1400	Sample ignored...	Printer idle
	The <SAMPLE> key was pressed while the printer was not in the
	process of imaging a page. The system could not produce a sample
	page when the key was pressed.
	The printer control console displays:
	SAMPLE CANNOT BE PRINTED--PRINTER IS IDLE.
Action	Continue pressing the <SAMPLE> key until sample page is
	delivered.
OS1401	Sample ignored...	already in progress
	Your first request for sample(s) is being processed; your second
	request is not accepted.
Action	None.
OS1405	No files found to sample print
	The system is unable to find file for the requested print sample on the
	system disk.
Action	Load the desired file to disk and reenter the SAMPLE
	filename.filetype command.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-27