Xerox DocuPrint 96MX manual Audit Log formatting no files selected, Audit Log reconciliation error

		DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
	Audit Log formatting - no files selected.
	The criteria selected in the audit log print options or audit log job
	options window are not met. This applies to the ’Jobs’ option only.
Action	Select different criteria and retry the operation.
	Audit Log reconciliation error.
	The stated monetary amount of the report does not match the sum of
	the sheets delivered.
Action	Abort or continue the job.
	Audit Log save complete.
	A request to save an audit log has completed.
Action	None.
	Audit Log sequence error.
	A sequence error has been detected on the last sheet delivered.
Action	Abort or continue the job.
	Audit Log stale date fault.
	An unexpired audit log exists on the audit log database for this
	printer.
Action	Abort or continue the job.
	Audit Logging state notification.
	The auditor has changed state by either entering or leaving the active
	auditing state.
Action	None.
	Audit report format already in progress.
	The audit report formatter is already processing a request.
Action	If the problem occurs when no audit logs are being displayed or
	printed call Xerox Customer Service.
	Bad block on tape device.
	The tape drive is unable to read a specific block of data from the tape.
	This could be caused by damaged media or a dirty or defective tape
	drive.
Action	1.	Clean the tape drive.
	2.	Replace the tape.
	If the problem occurs when no audit logs are being displayed or
	printed call Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-27