Xerox DocuPrint 96MX manual Font scaling resulted in size mismatch, Font xxxx is not alpha-numeric

SCALE COMMAND MESSAGES

	**Font scaling resulted in size mismatch**
	Scaling caused a mismatch between the estimated and actual
	bitmap sizes.
Action	Contact your systems specialist or Xerox Customer Support.

	**Font xxxx is not alpha-numeric**
	The font or logo is either Kanji or corrupted.
Action	1.	Check the file via the SAMPLE command.
	2.	If corrupted, restore the font from a backup source.

**Form File, xxxx, cannot be scaled (TL/DL size)**

The SCALE command has been aborted because the resulting FR6 file is larger than the system allows.

Action None

	**Form font file not found xxxx**
	The font file used in the requested form was not found in the FN6 or
	LG6 directory.
Action	Copy the 600 spi font or logo onto the system and reenter.
	or
	Use SCALE to create the 600 spi version.

	**Illegal switch xxxx**
	The requested switch is not permitted in SCALE.
Action	Correct and reenter the command.
	FST Size: n.n. Header SPI: n.n
	Bitmap SPI: same
	Bitmap SPI: bit-doubled
	Bitmap SPI: interpolated
	This message gives the font specification file size and spi
	information.
	**Lines of different widths not supported**
	The requested form consists of a format which cannot be scaled to
	600 spi correctly.
Action	None

11-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE