DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

1554

Invalid comm device; must be 1 or 2

 

The parameter value of the “DEVICE” statement in the SysUI

 

configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1555

Invalid parity; must be NONE, ODD, or EVEN

 

The parameter value of the “PARITY” statement in the SysUI

 

configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1556

Invalid databits; must be 7 or 8

 

The parameter value of the “DATABITS” statement in the SysUI

 

configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1557

Invalid stop bits; must be 1 or 2

 

The parameter value of the “STOPBITS” statement in the SysUI

 

configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1558

Invalid retry data; must be CONTINUOUS or NORMAL

 

The parameter value of the “RETRY” statement in the SysUI

 

configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1559

Missing baud rate from config data

 

The parameter value of the “BAUD” statement in the SysUI

 

configuration file is missing.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

1560

Comm parameters specify invalid frame in config file

 

The sum of the parameter values for the “DATABITS”, “STOPBITS”

 

and “PARITY” statement in the SysUI configuration file is invalid.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

15-10

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

Page 280
Image 280
Xerox DocuPrint 96MX manual Invalid comm device must be 1 or, Invalid parity must be NONE, ODD, or Even