Xerox DocuPrint 96MX manual System verification error messages, Devices not accessible name, name

13. System verification error messages

These messages appear on the system controller display if problems are detected during the verification self-tests that the system runs at start-up after the Date and Time display is entered or disabled. These messages are not displayed with letter or number codes. In this chapter, they are listed alphabetically by first word.

The appearance of any of these messages indicates the system is not fully functional. It may be possible to operate the system in a degraded mode, but its usage is questionable. The recommended action for all of the following messages is to contact your systems specialist or Xerox Customer Service.

Devices not accessible name, name...

One of the required system devices appears not to be in the system and is not functioning. The following abbreviations are used for the device names:

CD = Character Dispatcher

DISK = System disk

E-NET = Ethernet Network

GHO = Graphics Handling Option

HOST = online channel interface

IG = Image Generator

OEMI = OEM Interface

TAPE = Tape unit

X ENG = Xerographic Engine

XWP = Word processing communications interface

FCG exiting: invalid profile encountered.

The system has not loaded or cannot accept the parameters or values you have entered. The cause may be incorrect syntax, too many characters, etc. This message usually follows other system messages which explain why the operation has failed.

Action	1.	Verify that your values and/or syntax are correct and retry the
		command.
	2.	If the message reappears, contact your supervisor or systems
		support specialist.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 13-1