Panasonic KX-TG2622AL, KX-TG2621AL Error messages, Display message Cause/solution

TG2621AL_2622AL.book Page 36 Monday, February 20, 2006 3:40 PM

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	LAnother handset or the called handset is in use.*1
	LThe handset you tried to copy phonebook items to is in
	use.*1
	LThe handset you are calling is too far from the base
	unit.*1
Dial locked	LDial lock is turned on. To turn it off, see page 20.
Error!!	LThe handset’s registration has failed. Move the handset
	and base unit away from all electrical appliances and try
	again.
	LAnother handset user tried to send phonebook items to
	you but there was an error. Have the other handset user
	re-send the items to you (page 23).*1
	LThe entered password was wrong in programming dial
	lock. Enter the correct password.
---Incomplete---	LThe destination unit’s phonebook memory is full. Erase
Phonebook full	unnecessary items from the destination unit’s
	phonebook (page 22).*1
Invalid	LThe other handset is not registered.*1
No items stored	LYour phonebook or redial list is empty.
No link to base.	LThe handset has lost communication with the base unit.
Move closer to	Move closer to the base unit, and try again.
base, try again.	LConfirm that the base unit’s AC adaptor is plugged in.
	LRaise the base unit antenna.
	LThe handset’s registration may have been cancelled.
	Re-register the handset (page 33).
Phonebook full	LThere is no space to store new items in the phonebook.
	Erase unnecessary items (page 22).
Please lift up and	LA handset button was pressed while the handset was
try again.	on the base unit or charger. Lift the handset and press
	the button again.

36