Panasonic KX-TG2622AL Setting up the base unit, Connecting the AC adaptor and telephone line cord

TG2621AL_2622AL.book Page 10 Monday, February 20, 2006 3:40 PM

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit (A) and telephone line socket (B). Connect the AC adaptor cord by pressing the plug firmly (C).

LUse only the included Panasonic AC adaptor PQLV19AL.

C

Hook

A

(220-240 V AC, 50/60 Hz)

To socket

B

Note:

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a telephone double adaptor.

LThe unit is not designed to be used with rotary (pulse dialling) services.

If you subscribe to an ADSL service

Please attach a noise filter (contact your ADSL provider) to the telephone line between the base unit and the telephone line socket in the event of the following:

–Noise is heard during conversations.

–Caller ID features (page 24) do not function properly.

To socket

Noise filter

10