Programming
27
Programmable settings
You can customise the unit by programming the following features using the handset. To
access the features, there are 2 methods: scrolling through the display menus (page 27)
or using the direct commands (page 29).
LMainly the direct command method is used in these operating instructions.

Programming by scrolling through the display menus

1{MENU}
2Press {^} or {V} to select the desired menu. i {Select}
LIf there is a sub-menu(s), press {^} or {V} to select the desired item. i {Select}
Example: To access the handset ringer tone setting
Press {^} or {V} to select “Ringer setting”. i {Select}
Then press {^} or {V} to select “Ringer tone”. i {Select}
3Press {^} or {V} to select the desired setting.
LThis step may vary depending on the feature being programmed.
4{Save} i {OFF}
Main menu Sub-menu 1 Sub-menu 2 Page
Ringer setting Ringer volume ––
Ringer tone ––
Interrupt tone*1 ––
Voice enhancer –––
Dial lock*2 – – page 20
Copy phonebook*1 Copy 1 item – page 23
Copy all items – page 23
TG2621AL_2622AL.book Page 27 Monday, February 20, 2006 3:40 PM