![](/images/new-backgrounds/1242060/24206099x1.webp)
NOTE: If this method is not successful, try using the Wireless Setup Wizard on the product control panel or try using the USB cable connection method.
Connect the product to a wireless network using a USB cable (Officejet Pro X451 only)
If your wireless router does not support
1.Insert the software CD into the computer CD tray.
2.Follow the
CAUTION: Do not connect the USB cable until the installation program prompts you.
3.When the installation is complete, print a configuration page to make sure that the product has an SSID name.
4.When installation is complete, disconnect the USB cable.
Install the software for a wireless product currently on the network
If the product already has an IP address on a wireless network and you want to install product software on a computer, complete the following steps.
1.From the product control panel, print a configuration page to obtain the product IP address.
2.Install the software from the CD.
3.Follow the
4.When prompted, select the Wireless- Connect the printer to your wireless network and internet. option, and then click the Next button.
5.From the list of available printers, select the printer that has the correct IP address.
Manually connect the product to a wireless network
During the first 120 minutes of product setup, or after resetting the product's network defaults (and without a network cable attached to the product), the product's wireless radio will broadcast a wireless setup network for the product.
The name of this network is
36 | Chapter 3 Connect the product | ENWW |