Mains power loss |
|
In case of a power failure, or a deliberate disconnection |
|
to the power supply, all the set values are retained. |
|
Error message |
|
The electronics of the dishwasher can independently |
|
recognise and display faults. If a fault occurs, an error |
|
code in the display, one of the program control lamps |
|
and the Program End symbol in the display will blink. |
|
Please note down this error code before making con |
|
tact your Service Centre. |
|
The error message is deleted by switching off the main |
|
switch. | Mains switch |
Error codes and possible causes
A= Water tap closed, inlet hose filter blocked
C= Drain hose, coarse or fine strainer or sink trap blocked
E= Water pressure too low, water tap not comple- tely opened, inlet hose or inlet hose filter is blocked, machine losing water.
E2 = Call AEG Service force
H= Call AEG Service force
L= Call AEG Service force
Unloading the crockery basket
After the washing program is complete:
First unload the lower basket.
Then unload the upper basket, so that no drops of wa ter fall onto the dry crockery in the lower basket.
Inspect the coarse strainer after every washing sequence. Clean as necessary.
Start time / Remaining time display
Programme sequence display
17
