Installation

Stick on the damp protection film as described in the instructions on the rear side of the film (shorten where necessary).

Attach the side rails to the side panels of the furni￿ ture as described in the separate assembly instruc￿ tions.

Place the appliance in front of the high cupboard, and run the cable and hoses through the high cup￿ board's bay so that they are neither kinked or squas￿ hed.

Align the dishwasher in the centre of the bay and flush with the side panels, and where necessary, ad￿ just to be flush at the front surface using shims.

Carefully open the door of the appliance without changing the settings of the appliance.

Using the pre-drilled holes, screw the appliance to the side panels of the furniture on both sides in the upper inner area (see Detail A).

Before screwing the appliance diagonally through the base plate using two additional screws (always pre-drill), it is advisable to protect the appliance door from damage using suitable materials (e.g. the cardboard packaging). In order to tighten these screws, the door must be opened by approx. 45 de￿ grees (see Detail B).

Technical Data

Dimensions

 

 

Height

75.9 cm

Depth

57.0 cm

Width

54.6 cm

Capacity

12 place settings

Electrical connection

230-240V ￿ 50Hz

Motor rating during wash

140

W

Power of heating element

2000

W

Overall power

2150

W

Water supply pressure

Minimum 1bar

 

Maximum 10 bar

Detail A

Detail B

AEG

153 0409 20 / 09.99

Page 28
Image 28
Electrolux 55750 manual Installation, Technical Data