Electrolux 55750 manual Assembly Instructions for the Side Rail Assembly Kit, Procedure570

Assembly Instructions for the Side Rail Assembly Kit

Components:			Detail A
			SL L
1 off	Side rail, right	SL R	neighbouring
			edge
1 off	Side rail, left	SL L
4 off	Spacer 4 mm	DS 1
4 off	Spacer 3mm	DS 2
4 off	Spax screw 4.0 x 20 galvanised	SCHR
		Detail B
		DS 1	SL L
	600	DS 2	SCHR
			100
			19

21

		16
A+B			759
			19
	510min.
		546	574
	562-
762	568
16-
19
			759
	SL L	SL R
550

Procedure:570

Frame side panel thickness 19 mm:

-Remove the protective tape of the two spacing washers (DS 1) mounted on the side rails (SL R + SL L).

- Position the side rail (SL L): > Lower side (open) lying on the floor of the niche

>Edge lying against the side panel of the frame (see Detail A).

-Press on and fix the side rail (SL L), and secure with the supplied screws (2x SCHR

-Repeat this procedure for side rail SL R.

Frame side panel thickness 16 mm:

-Remove the protective tape of the two spacing washers (DS 1) mounted on the side rails (SL R + SL L).

-Stick the separately-supplied 3 mm spacing washers (SL R + SL L) over the pre-mounted 4 mm spacing washers (DS 1) as shown in Detail B.

The adhesive tape of the 3mm spacing washer (DS 2) must be on the outer side.

-Continue as described for the 19 mm thick frame side panel.

153 0771 03 / 03.98