Xerox DocuPrint 96MX manual OS1410 Sample not allowed by JDE, OS1412 Cannot sample a secured file

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1410 Sample not allowed by JDE

The <SAMPLE> key was pressed but JDE specified ABNORMAL

SECURITY = YES. The system cannot produce a sample print.

The printer control console displays:

SAMPLE CANNOT BE PRINTED--SEE MESSAGE AT THE CRT.

Action None.

OS1412	Cannot sample a secured file
	The file you requested is restricted and cannot be sampled.
Action	None.
OS1415	Sample of Kanji fonts not allowed
	The SAMPLE command was entered, requesting a Kanji (Japanese)
	font, which may not be sampled.
	Note: This message should not appear on systems not sysgened for
	Japanese. If it does, the requested font is corrupt, causing a false
	message.
Action	1. Retry the SAMPLE command, ensuring that you are requesting
	a font that may be sampled.
	2. If the message reappears, contact your systems specialist or
	the Xerox Font Center for assistance with replacing the font.
OS1416	Sample not allowed—Printer is busy
	The SAMPLE request is not allowed at this time.
Action	Retry at a later time.
OS1417	Interpress master not found; check Start command
	The file from the START command “DISC:fname” parameter could
	not be opened and, thus, the job could not be printed.
Action	1. Restart the job with the correct file name specified
	or
	2. resend and restart the job.
OS1420	Page spacing not allowed by JDE
	The SPACE n PAGES command was entered. JDE specified
	ABNORMAL SECURITY = YES. The system cannot space over
	pages.
Action	1. Allow all data to print.
	or

2.Enter the ABORT job command to cancel the job. 2.Recode JDE, eliminating “ABNORMAL SECURITY = YES.”

6-28 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE