Type style and pitch selection
If your software does not control the type style and pitch, you must make these selections on the control panel. The default selections depend on the settings of DIP switches
1.Hold the Style/Pitch and Quiet Mode switches down when you turn the printer’s power on, if you intend to set the type style. Hold the Style/Pitch and Paper Feed switches down if you intend to set the print pitch.
Hold only the Style/Pitch switch down if you intend to make both
settings. The printer will beep in acknowledgement as it powers up.
2.Press the On Line switch to set the printer
3. To select a type style, press the Style/Pitch | switch once and press the | - |
Quiet Mode or Paper Feed switch one or more times. |
| |
4.To select a print pitch, press the Style/Pitch switch again and press the Quiet Mode or Paper Feed switch one or more times.
5.Press the On Line switch to set the printer back
Most programs begin each printing job by sending a command that
resets the printer. That is why you must press these switches as you power up. If you do not press these switches during
If you want to change the type style or pitch in the middle of a printing job, one way to do this is to insert a printing pause command in your file at the point of the change. When the printer pauses, press the On Line switch to go
If you were able to define software commands for print pitch and type style, changes like these can be inserted in your text tile and made on the fly without a printing pause.
Other printer commands
If your software enables you to place the escape code in your files, or
if you were able to define this as a user option during installation, you are in a very powerful position: you can embed almost any printer command
in your files. The printer commands are explained in detail in Appendix B.
32
