Xerox DocuPrint 96MX OS1560 Tape rewind complete, OS1562 Font file not found for file-name.FNT

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1560	Tape rewind complete
	The system has finished rewinding the tape.
Action	None.
OS1561	Font mapping does not exist for file-name.FNT.
	There is no font mapping to run the job. Job processing will continue
	using the font specified in the PDE.
Action	If you wish to override the PDE font, reenter the command using valid
	font mapping.
OS1562	Font file not found for file-name.FNT.
	You have specified a font file that does not exist in the system. Job
	processing will continue using the font specified in the PDE
	statement.
Action	If you wish to override the PDE font, verify the font file and reenter the
	command.
OS1563	SEF file not found
	You have specified that the font mappings you wish to use in the job
	are contained in a file that does not exist in the system. Job
	processing will continue using the font specified in the PDE
	statement.
Action	If you wish to override the PDE font, verify the mapping file and
	reenter the command.
OS1570	File protected--unable to dump
	The system cannot print dump because the file is protected by the
	SECURE filename.filetype command.
Action	1. Obtain the correct password and log on at Level 5. (Refer to
	your DocuPrint 96/DocuPrint 96MX LPS Operations Reference
	chapter on setting LPS parameters for additional information.)
	2. Retry printout.
OS1580	Can‘t print Ethernet error page - missing font
	An Ethernet-transmitted job contains errors. The error page will not
	print because the required font was not found on the system disk.
Action	1. Load the necessary font file to disk. (Refer to your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference
	chapter on HIP-accessed communicating modes for additional
	information.) Contact your systems specialist or Xerox
	Customer Support for information on the correct font to load.
	2. Restart the job.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-33