Xerox DocuPrint 96MX Data Set Ready timeout, Frame error detected, Parallel device I/O error

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

559	Data Set Ready timeout
	The Data Set Ready timeout has been exceeded.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

560Frame error detected

The communications driver detected a framing error.

Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
561	Parallel device I/O error
	An attempt was made to communicate through the parallel port. The
	user interface does not communicate through the parallel port.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
562	Parallel device out of paper
	An attempt was made to communicate through the parallel port. The
	user interface does not communicate through the parallel port.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

563Hardware overrun while receiving from ESS

The Microsoft Windows communications driver did not have enough time to service the RS232 port; or FTR did not have enough time to empty the driver’s buffers.

Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
565	Receive Line Signal Detect timeout
	The receive Line Signal Detect timeout has been exceeded. The user
	interface does not use this feature of RS232.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

566Receive queue overflow

The communication driver’s receive queue is full.

Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

15-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE