Unpacking the M9.4 Treadmill
Your M9.4 treadmill is carefully inspected before shipment, so it should arrive in good operating condition. Precor ships the unit in five pieces as listed below:
•running bed assembly
•handrail/display assembly
•lift motor
•lift motor cover
•hardware kit (contents described below)
Carefully unpack the parts from the original shipping container.
CAUTION: This unit weighs over 150 pounds. To avoid back strain and to ensure the safety of the unit and yourself, we suggest that you drop the sidewalls of the box and slide the running bed assembly from the box, rather than lifting the running bed assembly from the box.
After unpacking the treadmill, open the hardware kit and make sure that you have the following items:
two
one long shoulder bolt
four 3/8" screws
one 3/8" locknut
two plastic plug caps
three cable ties
one 1/4" hex key
one 5/16" hex key
If any items are missing, contact your authorized Precor dealer. For the dealer nearest you, call
Important: The packaging for this equipment was designed to protect it during shipment. Please store the original packaging in a safe place in case you need to ship the M9.4 treadmill in the future.
page 6
