Precor M9.4 owner manual Green

Center Display	During a workout, the center display moves from TIME, MPH, and MILES in
Window	five second intervals.
	TIME: Functions like a stopwatch and provides your total exercise time per
	session, up to a maximum of 59 minutes and 59 seconds. Use this display to
	keep track of how long you have exercised in a given session.
	MPH: Shows your workout speed, from 1.0 to 10 mph. Use this display to
	measure your workout speed at any given moment.

MILES: This display shows the distance you have traveled up to a maximum of

99.99miles. Use this display to track how far you have travelled during a specific length of time or, once you have achieved the distance you want, use TIME to determine how long it took you.

Right Display	INCLINE: Displays the percent of incline, from 1 to 15%.
Window
Keypads	Each keypad on the M9.4 treadmill’s electronic console provides specific
	functions. The following information explains the different uses of the keypads,
	from left to right. To locate each keypad, refer to Photo 6.
	ENTER WEIGHT: Press this keypad when the desired weight appears in the
	WEIGHT display. You can also use this keypad to reset the entire electronic
	console’s memory to zero by pressing and holding ENTER WEIGHT for about
	three seconds.
	SCAN (on Left Display): If CAL/MIN or TOTAL CAL is currently displayed,
	press SCAN to hold the displayed information. Press SCAN again and the
	display returns to alternating between CAL/MIN and TOTAL CAL.
	The SCAN keypad can also reset the CAL/MIN or TOTAL CAL. displays to
	zero. You might use this feature when you want to measure calories burned
	after your warm-up period. When the calories appear, press and hold SCAN for
	three seconds. The numbers in the display reset to zero.
	GREEN	: Press and hold this keypad to increase body weight when the
	WEIGHT display appears. Once a weight has been entered, press this keypad
	to increase the speed of the running belt.
	YELLOW	: Press and hold this keypad to decrease body weight when the

WEIGHT display appears. Once a weight has been entered, press this keypad to decrease the speed of the running belt.

SCAN (on Center Display): Press this keypad to hold the current numbers being displayed. Press it again and the console returns to alternating between TIME, MPH, and MILES displays.

The SCAN keypad can also reset the TIME and MILES displays to zero. You might use this feature if you want to discover the time elapsed or the miles you progress after your warm-up period. When the TIME appears, press and hold SCAN for three seconds (do the same for the MILES display). The numbers in the display reset to zero.

page 13