Xerox DocuPrint 96MX OS1322 Lead edge screen setting is nn, OS1324 Energy Saver mode is disabled

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

Action None.

OS1322 Lead edge screen setting is nn

This message confirms that your EDGE (lead edge screen) command parameters have been accepted or provides you with the current settings if you have not entered new parameters.

Action None.

OS1323 Energy saver timeout is nn minutes

After entering the ENERGY command with a timeout parameter, this message tells you that the value you have entered is accepted. If you enter the ENERGY command with no parameters, the message tells you the number of minutes currently set.

Action None.

OS1324 Energy Saver mode is disabled

The energy saver has been turned off.

Action None.

OS1325 IOT Attention steady light is xxx, flashing light is xxx

After entering the ATTENTION LIGHT command, this message tells you whether the attention light(s) on your system‘s printer is enabled or disabled, steady or flashing. If you enter the ATTENTION LIGHT command with no new parameters, the message provides the current settings.

Action None.

OS1326 Already in lockout mode

During service activities, the LOCKOUT mode has already been initiated.

Action None.

OS1329 BINFULL criteria: n% ream threshold, n% boundary

After entering the BINFULL command with threshold and boundary parameters, this message tells you that the values you have entered are accepted. If you enter the BINFULL command with no parameters, the message tells you the current settings.

Action None.

OS1330 XPS Accounting reset

XPS deletes all accounting files and recreates and initializes the accounting recovery file.

Action Enter XPS command.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-25