HIP (HOST INTERFACE PROCESSOR) MESSAGES

 

 

HP8250

Fatal protocol violation detected

 

Commands used violate the higher-level software protocols used to

 

communicate between the DocuPrint 96/DocuPrint 96MX LPS and

 

the host. The host will be advised to restart communication with the

 

printer. No data should be lost in this process.

Action

None.

 

 

HP9200

Interface failure: unable to receive data

 

A hardware error has occurred. The system is unable to recover lost

 

data. The job will abort and the interface will go offline.

Action

1. Resend the job.

 

2. If the error continues, contact your systems specialist or Xerox

 

Customer Service.

 

 

HP9210

Interface failure: failed to go offline

 

HIP is unable to post the offline status to the XPAF host computer.

Action

None.

 

 

HP9400

HostCLR not received. See host for reason

 

The HIP DIAGNOSTIC command for interactive diagnostics was

 

entered. The system failed Test 1: HOSTCLR control line not

 

verified.

Action

1. Wait until the diagnostic test is terminated or completed.

2.Contact your systems specialist or Xerox Customer Service and give information appearing on the 871-CM display.

HP9410 Data to host transfer error. See host for reason

The HIP DIAGNOSTIC command was entered. The system failed Test 2: unable to send a command on OEMI and in turn read the printer status. The system is terminating the diagnostic test.

Action

1.

Inspect the 871-CM display (the “host” referred to in message)

 

 

to learn the nature of the failure.

 

2.

Contact Xerox Customer Service and give information

 

 

appearing on the 871-CM display.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

4-15

Page 37
Image 37
Xerox DocuPrint 96MX manual HP8250 Fatal protocol violation detected, HP9200 Interface failure unable to receive data