Xerox DocuPrint 96MX manual IFU Interpress font utility messages

5. IFU (Interpress font utility) messages

	These messages appear when the Interpress font utility program
	(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
	Reference chapter on HIP-accessed communicating modes for
	additional information.) The meaning of terms used in this section
	can be found in the Glossary at the back of the message guide.
IF1000	Exit IFU to print
	This message advises that you must either exit IFU before printing
	your job or IFU is exiting to print a job.
Action	If IFU has not exited to run the print job, enter the END command to
	return control to the operating environment and to invoke the print
	job.
IF1010	Compiling map xxxx
	The requested map is being compiled.
Action	None.
IF1020	Compiling IPFONTS from FIS master xxxx
	IPFONTS (Interpress fonts) are being compiled from the requested
	FIS master during execution of the ADD command.
Action	None.
IF1021	Compiling DCFONTS from FIS master xxxx
	DCFONTS (data center fonts) are being compiled from the requested
	FIS master during execution of the ADD command.
Action	None.
IF1030	Family x does not exist in directory
	This is an informational message stating that the IPM (Interpress
	mapping) file directory does not have the requested font family.
Action	None.
IF1061	Consolidating unreferenced character mapping tables
	This is an informational message.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-1