Xerox DocuPrint 96MX manual Failure to stop AUD file Mgr, FCG Exiting Duplicate Profile Entries

	DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
	Failure to stop AUD file Mgr.
	This may occur when the Exit To DOS option is selected from the
	System Control or Utilities Menu. The File Manager used for auditing
	has failed to properly terminate.
Action	If the problem persists, call Xerox Customer Service.
	FCG Exiting: Duplicate Profile Entries
	When searching the FCG.LIB file for the specified profile label, FCG
	will return the following message if 2 profile labels are identical in
	name to the specified profile label.
Action	None.
	FCG Exiting: FCG.LIB not present on system.
	The profile library you have entered cannot be found.
Action	None.
	FCG Exiting: Finishing Device %0 not found
	You have requested a profile label that does not exist in the FCG.LIB
	file.
Action	None.
	FCG Exiting: Finishing Device <profile-name> not found
	The personality profile name you have requested is not contained in
	the specified FCG.LIB. This message is followed by message
	OS1976 Profile not loaded.
Action	None.
	FCG Exiting: Invalid command
	You have requested a command that does not exist in the FCG’s task
	capabilities.
Action	None.
	FCG Exiting: Invalid Profile Encountered.
	The following message is displayed if the information necessary for
	the FCG SHOW command is not present on the system.
Action	None.
	FCG Exiting: Invalid profile—missing semicolon (;)
	A semicolon is required at the end of a profile label and its
	parameters. You have failed to enter the semicolon.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-37