Xerox DocuPrint 96MX manual OS1279 Command file error label not found, OS1290 Cluster file full

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1279		Command file error - label not found
		An incorrect prefix was entered for the command file.
	Action	Reenter the statement correctly.
OS1280		Message file is not defined. Requesting ******;
		message file: **;
OS1282		Message file does not exist. Requesting task: ******; Message
		file: **;
		The message file containing the message that should be displayed
		for the indicated task does not exist on the system disk.
	Action	1. Document circumstances of the message appearance.
		2. Record any additional messages displayed in conjunction with
		it.
		3. Contact your systems specialist or Xerox Customer Service
		with the above information.
		Note: Messages OS1280 and OS1282 should not appear. If one of
		these messages should occur:
OS1283		Unexpected Barcode encountered
		The IOT read a barcode when there should not have been one.
	Action	Abort the job and correct the job programming or continue the job in
		the BAR OFF mode.
OS1285		Message does not exist. Requesting task: ******;
OS1287		Should not display this message. Requesting task: ******;
		The message file containing the message that should be displayed
		for the indicated task does not exist on the system disk.
	Action	1. Document circumstances of the message appearance.

2.Record any additional messages displayed in conjunction with it.

3.Contact your systems specialist or Xerox Customer Service with the above information.

Note: Messages OS1285 and OS1287 should not appear. If one of these messages should occur:

OS1290		Cluster file full
		The file containing the list of clusters is full.
	Action	Delete one or more clusters, and retry.
		Note: The file can only contain 152 clusters

6-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE