Xerox DocuPrint 96MX manual OS2825 Complete Online Jobs. Then vary system offline

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2825	Complete Online Jobs. Then vary system offline.
	A task was requested for which the system must be offline.
Action	1. Enter the CONTINUE command or press the <CON> key to
	process remaining jobs.
	or
	Complete or abort any current jobs.
	2. Enter the RESET command to delete all jobs.
	3. Enter the OFFLINE command.
OS2830	Enter ‘HIP END’ before starting another job.
	HIP must be prohibited from automatically starting another job while
	a job is being processed from another source.
Action	Wait until system is idle, then retry.
OS2835	Enter ‘D’ for duplex printing, ‘S’ for simplex printing:
	This is one of the series of FEX parameter prompts for the test print
	job. Additional prompts include messages OS2922, OS2923,
	OS2924, and OS1136.
Action	Enter D for two-sided or S for one-sided test print job.
OS2840	Output must be stopped before spacing can be done.
	The SPACE n PAGES command was entered during printing. The
	command cannot be processed.
Action	1. Enter the STOP O command.
	2. Enter the SPACE n PAGES command.
OS2860	Approaching disk saturation.
	The print file is nearly full. Input is slowing until enough data is printed
	to free some cylinders on the system disk.
Action	None.
OS2865	Leaving disk saturation.
	Enough data has been printed to create space on the system disk.
	Input is resuming normal speed.
Action	None.
OS2870	Disk saturated. Input is waiting for disk space.
	The print file is full. Input has slowed to allow data to print and create
	more space on the system disk.
Action	None.

6-68 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE