Xerox DocuPrint 96MX manual OS1270 Command file aborted, OS1272 Command file delaying

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1270	Command file aborted
	The @ABORT command was entered. The system has abandoned
	processing of the initiated command file.
Action	None.
OS1271	Cannot nest command files. Check and retry.
	The command file entered is formatted incorrectly. It appears to be
	contained (nested) within another command file
Action	1. Correct your command file format. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS Operations Reference chapter on
	creating and using command files for additional information.)
	2. Retry your command file request.
OS1272	Command file delaying
	The .DELAY n command was entered. Command file processing is
	being suspended for a specified period of time. (n = number of
	seconds.)
Action	None.
OS1273	Command file resumed
	Following an interruption, command file operations have started
	again.
Action	None.
OS1275	Command file suspended
	The .PAUSE command was entered. Command file processing is
	suspended for an unspecified period of time.
	or
	The .WAIT command was entered. Command file processing is
	suspended until the current print job is completed.
Action	None.
OS1276	Command file not suspended.
	This message advises you that command file operations have not
	stopped being processed.
Action	None.
OS1278	Command file terminated
	The .EXIT command was entered. Command file processing is
	ended.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-21