Xerox DocuPrint 96MX manual OS2007 Empty sample output tray, OS2008, OS2009 Both trays are full

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2007	Empty sample output tray
	The sample tray contains more than 100 sheets. It must be emptied
	for printing to resume.
	The printer control console displays:
	EMPTY SAMPLE TRAY
Action	Remove output from the sample tray.
OS2008	CAUTION: paper size in selected tray has changed.
	The paper size in a tray in the currently selected cluster has been
	changed.
Action	1. Verify the change.
	2. Change the paper, if desired.
	3. Enter the CONTINUE O command or press the <CON> to
	resume printing. (Refer to the chapter on feeder trays in your
	DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)
OS2009	Both trays are full
	The SELECT AUTO command was entered. After the first
	destination output tray was filled, the system was unable to switch
	output to the other tray because it was also full. Printing stops.
Action	1. Unload both output trays. (Refer to the chapter on output trays
	in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

2.Press the <CON> key or the Continue button, or enter the CONTINUE command to resume printing.

OS2010 Mount input tape; ‘CONTINUE I’ when ready

The START command was entered offline. (Magnetic tape may already have been mounted.)

Action	1.	Load the magnetic tape reel for the job to be printed if you have
		not already done so. (Refer to the offline chapter in your
		DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)
	2.	Enter the CONTINUE I command to start inputting data from
		tape.
OS2020 Mount next volume ‘CONTINUE I’ when ready
	A multivolume job is being processed. The system has encountered
	the End of Volume magnetic tape label.
Action	1.	Load the magnetic tape reel containing the next volume of the
		report. (Refer to the offline chapter in your DocuPrint 96/
		DocuPrint 96MX LPS Operator Guide.)
	2.	Enter the CONTINUE I command to resume input.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-47