OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS9989

Unable to acquire memory for device drivers:

 

Memory problems are sufficiently severe that there is not enough

 

memory to load hardware peripheral handler(s).

Action

1.

Reboot the system by pressing the Boot button, then entering

 

 

B.

 

2.

If the message reappears, contact your systems specialist or

 

 

Xerox Service Support Center.

OS9990

Fatal disk error reading device drivers:

 

A fatal system disk error occurred when executive attempted to load

 

the indicated hardware peripheral handlers.

Action

Reboot the system by pressing the Boot button, then entering B.

 

If the message reappears, contact your systems specialist or Xerox

 

Service Support Center.

OS9991

Invalid or destroyed task images:

 

Indicated driver files required for operation of the system appear to

 

have been destroyed on the system disk.

Action

1. Reboot the system by pressing the Boot button, then entering

 

B.

2.If the message reappears, resysgen if authorized to do so (refer to your DocuPrint 96/DocuPrint 96MX LPS System Generation Guide),

or

Contact your systems specialist or Xerox Service Support Center.

OS9992

Driver task files not found:

 

This message is displayed at system boot time. This usually

 

indicates that a system generation was performed with a

 

configuration which does not match the current configuration.

Action

Resysgen with the proper configuration, if authorized to do so, (refer

 

to your DocuPrint 96/DocuPrint 96MX LPS System Generation

 

Guide),

 

or

 

Contact your systems specialist.

 

 

OS9993

Memory too degraded to load device drivers.

 

There is not enough memory to load the system device drivers.

Action

Contact your systems specialist or Xerox Customer Service.

6-130

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

Page 208
Image 208
Xerox DocuPrint 96MX OS9989 Unable to acquire memory for device drivers, OS9990 Fatal disk error reading device drivers