Xerox DocuPrint 96MX manual PR2780 No files found matching mask, PR2985 Security violation

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES

PR2780 No files found matching mask

No files were found containing file name characters entered in the “mask” option of the HARDCOPY command.

Action	1.	Recheck and correct “mask” characters. (Refer to your
		DocuPrint 96/DocuPrint 96MX LPS Operations Reference
		chapter on setting LPS parameters for additional information.)
	2.	Reenter the command.

PR2985 Security violation.

The requested file has been secured by the ABNORMAL SECURITY

=YES command. An attempt was made to access it at a wrong logon level.

Action	To access the file, obtain the correct password and logon at Level 5.
	(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
	Reference chapter on setting LPS parameters for additional
	information.)
PR9400	Error during file directory search.
	A disk error occurred while the system was searching for a requested
	file.
Action	1. Retry the HARDCOPY command.

2.If the problem continues, contact your systems specialist or Xerox Customer Service.

PR9500	Error during xcs file creation.
	A disk error occurred while a .XCS file sent from a workstation was
	being created on disk. File creation is aborted.
Action	1.	Resend the file.
	2.	If the problem recurs, contact your systems specialist or Xerox
		Customer Service.

PR9520	Cannot open RECTSK.SYS.
	The system is unable to initiate job recovery after a software failure
	because a hardware error makes the recovery file inaccessible.
Action	1. Restart the job.

2.If the message reappears, contact your systems specialist or Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 9-3