Xerox DocuPrint 96MX manual OS0853 Mode xxx housing, -plex

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS0853 Mode: xxx housing, -plex

During PQA, this message identifies the housings being adjusted and whether simplex or duplex printing is specified for the current PQA operation. This message may accompany other related messages.

Action None.

OS0854 After Print Quality Adjustment: continue printing automatically

This message specifies that when print quality adjustment is completed, printing of the job will continue automatically.

Action None.

OS0855 After Print Quality Adjustment: stop before printing

This message specifies that when print quality adjustment is completed, printing will not continue automatically.

Action None.

OS0856 Print Quality Adjustment request has been canceled

Your PQA CANCEL command request has been processed and print quality adjustment has been canceled.

Action None.

OS0860 Substituting color for color for this report

After you enter a SUBSTITUTE INK command, this message tells you which primary color is being substituted for another primary color in this report.

Action None.

Note: The current settings are always displayed whenever a valid SUBSTITUTE INK command is entered or following a successful print quality adjustment. In addition, the current SUBSTITUTE INK command settings are displayed at the time the output task is loaded into memory. The exact wording of messages OS0860 through OS0875 depends upon the parameters you specify in your SUBSTITUTE INK command.

OS0861 Substituting color for all colors for this report

After you enter a SUBSTITUTE INK command, this message tells you the primary color which is being substituted for all non-black primary colors in your report.

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-7