Xerox DocuPrint 96MX SF4500 Cannot write on tape. Check tape and try again, SF6020 Column ignored

	SFS (STATUS FILE SERVICES COMMAND) MESSAGES
SF4500	Cannot write on tape. Check tape and try again.
	The write enable ring is missing from magnetic tape, magnetic tape
	is not loaded correctly, or the magnetic tape drive is not online to the
	printer.
Action	Place a write enable ring on the magnetic tape reel.
	or
	Press the On Line button on the magnetic tape drive.
	or
	Reload the magnetic tape correctly. (Refer to the offline chapter in
	your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)
SF6010	Statement ignored.
	During the compiling of a user-created form, the system has
	encountered a command in which incorrect syntax was used. The
	command is being ignored.
Action	Recompile the form, restating the command correctly. (Refer to your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter
	on setting LPS parameters for additional information.)
SF6020	Column ignored.
	A WIDTH or CONTENT statement in a user-created form is
	incorrectly formatted or missing. The column will not be created.
Action	Recompile the form, entering WIDTH and CONTENT statements
	correctly.
SF6030	...Column x
	An error exists in the indicated column. (The message is followed by
	other message(s) explaining the nature of the problem.)
Action	None.
SF6035	...Statement(s) ignored: xx
	A user-created Status File form has been compiled. The form
	contains the indicated number of incorrectly constructed statements.
Action	If desired, recompile the form, correctly entering statements that
	were ignored.

SF6040. ..Valid columns: x

Auser-created form has been compiled, containing the indicated number of columns.

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 12-3