Xerox DocuPrint 96MX manual OS8100 Requested task already active Reboot the system

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS8100	Requested task already active - Reboot the system.
	The task requested is still active improperly, possibly due to improper
	job recovery after a software failure.
Action	Press the Boot button and enter B to force proper recovery by
	rebooting the system.
OS8200	Invalid TMCB received from a task.
	A task message control block (information sent from one task to
	another) was sent to the wrong task.
Action	1. Enter the RESET command.
	2. Retry the job.
	3. If the message reappears, contact your systems specialist or
	Xerox Customer Service.
OS8250	System mailbox value is invalid.
	The system mailbox value you have entered is not accepted by the
	system.
Action	Verify your parameter and retry the command.
OS8251	System mailbox read/write error.
	There is a serious internal problem with the system.
Action	Contact your supervisor or systems specialist, or Xerox support.
OS8300	Unable to access next file for sample print.
	The input task encountered a system disk error during a sample print
	job.
Action	1. Restart the job.

2.If the failure recurs, contact your systems specialist or Xerox Customer Service.

OS8320	Input cannot open accounting file.
	The accounting file on the system disk cannot be accessed.
Action	Copy file ACFILE.SYS to the system disk from your Xerox DocuPrint
	96/DocuPrint 96MX LPS OSS tape, reentering user department
	names. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
	Operations Reference chapter on tracking system activity for
	additional information.)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-117