Xerox DocuPrint 96MX manual Informational messages, Cluster clusterName, Paper stockTypestock

SUMMARY SHEET ERROR MESSAGES

Informational messages

Informational Messages

Character nB is not in font “fileType>localFontName”, set nB.

This message identifies character references beyond the last character, highest character code, in an LPS font and follows ...Font problem.... The substitute character appears in place of the invalid

character.

Action None.

Note: In this message, the letter “B” indicates an octal value.

Cluster: “clusterName,” Paper: “stockType”stock.

This message follows Please Define Clusters And Load Papers as Follows: and instructs you to load the stock and define the cluster name which includes the tray(s) containing the paper.

Action None.

Define CLUsters and load papers as follows:

Stock requests in the document are handled by defining temporary cluster names. This message is displayed on the system controller display and is followed by instructions for loading paper and defining clusters.

Action	1.	If printing stops and you are prompted to key in the CONTINUE
		command, load the correct stock in the feeder trays.
	2.	Define the clusters as instructed.
	3.	Key in the CONTINUE command or press the <CONTINUE>
		key.

Document generated comment (page n) = “commentString.”

The document requested that a comment be added to the summary sheet.

Action None.

Document Generated Comment “documentComment”.

A comment field is taken from the printing instructions or protocol and is displayed on the summary sheet.

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 14-13