Xerox DocuPrint 96MX manual OS2004 Paper trays not set for same size

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2004	Paper trays not set for same size
	The length guides of the feeder trays are adjusted for different paper
	lengths. Automatic switching will not be possible. (This is an
	information message appearing at the start of the job.)
	The printer control console displays one of the following:
	BE SURE BOTH TRAYS CONTAIN THE SAME SIZE PAPER--
	PRESS i
	LENGTH GUIDES IN BOTH TRAYS MUST BE ADJUSTED TO THE
	SAME SIZE
	PAPER TRAYS ARE NOT ADJUSTED TO SAME SIZE--PRESS i
	FOR MORE DETAILS
	READY TO PRINT--BOTH PAPER TRAYS NOT SET FOR SAME
	SIZE--PRESS i
	TRAY 1 SET FOR __.__X__.__" PAPER. TRAY 2 SET FOR __.__
	X__.__" PAPER
	TRAY 1 SET FOR _X_MM PAPER. TRAY 2 SET FOR _X_MM
	PAPER
	WARMING UP--BOTH PAPER TRAYS NOT SET FOR SAME SIZE-
	-PRESS i
Action	If tray switching is desired, reset the paper length guides to the same
	size. (Refer to the chapter on feeder trays in your DocuPrint 96/
	DocuPrint 96MX LPS Operator Guide.)

OS2005	Enter ‘CONTINUE I’ to resume input
	or
	Select ‘CONTINUE I’ to resume input
	The input process was interrupted by the entered command or error
	condition. The system is now ready to resume input.
Action	Enter the CONTINUE I command to resume interrupted data
	transmission.

OS2006	Enter ‘CONTINUE I’ or ‘ABORT I’.
	or
	Select ‘CONTINUE I’ or ‘ABORT I.’
	Input was interrupted due to insufficient file space or a DJDE
	processing error. The system is waiting for a command.
Action	Enter the CONTINUE I command to resume input. (Some data may
	be lost.)
	or
	Enter the ABORT I command to cancel the job.

6-46 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE