Xerox DocuPrint 96MX HP2300 Command error at part of command in error, HP2310 Reenter command

HIP (HOST INTERFACE PROCESSOR) MESSAGES

HP2300	Command error at: part of command in error
	The command part indicated was entered incorrectly.
Action	Reenter the command correctly. (Refer to the HIP chapter in your
	DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

HP2310	Reenter command
	An incorrect command was entered.
Action	Reenter the correct command. (Refer to the HIP chapter in your
	DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

HP2320	Invalid command with current host type
	The command entered is not correct for the current host.
Action	Enter the command appropriate for your current host. (Refer to your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter
	on HIP-accessed communicating modes for additional information.)

HP2330 Invalid command with no host specified
	A host must be selected before the command can be carried out.
Action	1.	Select a host. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
		Operations Reference chapter on HIP-accessed
		communicating modes for additional information.)
	2.	Reenter the command.

HP2340 Cannot change: HIP must be in ‘STOP’ state.

To invoke the CHANGE command, HIP must be in the STOP state and the file must be completely received and in the PENDING state.

Action None.

HP2341 Cannot change: job must be in ‘PENDING’ state.

To invoke the CHANGE command, HIP must be in the STOP state and the file must be completely received and in the PENDING state.

Action None.

HP2342	Cannot change: change process already active.
	Only one CHANGE command can be invoked at one time.
Action	Allow the current change process to complete before invoking
	another.

HP2343 Cannot change: invalid file specification.

The output file-type is either invalid or not a type specified in the ACCEPT list.

Action None.

4-12 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE