Xerox DocuPrint 96MX manual SOR-input received out of sequence already in input phase

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

	SOR-input received out of sequence - already in input phase.
	A Start Of Report signal has been received from the ESS before an
	End Of Report signal for the preceding job.
Action	If the problem persists, call Xerox Customer Service.

	SOR-output received out of sequence - already in output phase.
	A Start Of Report signal has been received from the ESS before an
	End Of Report signal for the preceding job.
Action	If the problem persists, call Xerox Customer Service.

	Specified file does not exist.
	An audit log desired for formatting, saving, deletion, or inquiry does
	not exist.
Action	Change the name of the report entered in the request field, or select
	from the list of audit logs.

	System has insufficient disk space to format log xxxx. Convert
	or Print request has been cancelled.
	The PC user interface console log print file is full.
Action	Clear files on the PC UI hard disk to make more space for the print
	log. If you don’t want to clear space on the PC UI hard disk, you can
	save the console log file to a floppy diskette and print it from the
	diskette.

Target filename already exists.

An Audit Log with the same report name already exists on the target device.

Action Rename the target file or delete the old Audit Log and retry the operation.

The Current Log is empty.

Information message only. You tried to display an empty current console log.

Action None.

The Current Log is in use and cannot be emptied.

The current console log is in use.

Action None.

15-52 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE