Xerox DocuPrint 96MX manual OS2288 Value. Change Select command or Con O, OS2289

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2288	WARNING: Current select command overrides data destination
	value. Change Select command or Con O
	The data stream contains a DESTINATION=EXPORT statement,
	and the current operator SELECT keyin is other than AUTO or E.
Action	1. Change SELECT to AUTO or E to enable the Bypass Transport
	as the destination.
	2. Press CONTINUE to override the datastream destination and
	send the paper to the operator selected destination.
OS2289	WARNING: Current feed command overrides data feed= value
	A FEED cluster name command was entered calling for a different
	cluster than that specified by DJDE. The system will ignore the
	DJDE.
Action	Press the <CON> key to resume printing and let the FEED command
	override the DJDE.
	or
	Enter the FEED MAIN command to let the data stream (DJDE)
	determine the cluster used. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS Operations Reference chapter on setting up
	print jobs for additional information.)
OS2290	Enter ‘RETURN’ to continue cluster display
	The cluster list contains more than a single display of information.
Action	Press the <ENTER> or <RETURN> key to view additional displays.
OS2291	Response timeout - cluster display stopped
	The CLUSTER or CLP command was used to display the cluster list
	but the <ENTER> key was not pressed within a reasonable amount
	of time to continue the cluster display. The cluster display has been
	terminated.
Action	Reenter the CLUSTER or CLP command, if desired.
OS2295	Problem with stockset, see display below
	One or more clusters in the current stockset has a problem. A cluster
	display follows, indicating specific errors that should be resolved
	before printing. If a status is flashing, it must be resolved before you
	can print.
Action	1. Correct the problem shown flashing in the status column.
	2. Press the <CON> key to resume printing.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-55