Xerox DocuPrint 96MX manual OS2875 Disk saturation ended. Input resuming, OS2900

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2871	SDI Job saturates shared disk - possible actions:
	Release SDI Jobs and enter ’CONTINUE I’
	Enter ’PRINT 1’ to print 1 copy of current report
	Enter ’ABORT JOB #’ to abort current job
	A disk full deadlock condition has occurred.
Action	Select one of the options listed.

1.If ’CONTINUE I’ is selected ’RESUMING INPUT’ will be displayed and the job will resume If disk space has been freed.

2.The original message will be redisplayed if disk space is still inadequate.

3.If ’PRINT 1’ is selected, input one copy of the report will be printed and the message ’OS1830 PRINTING 1 COPY OF CURRENT REPORT’ will be displayed.

OS2875 Disk saturation ended. Input resuming.

Input is resuming normal speed because enough space exists on the system disk.

Action None.

OS2880 Max fonts & forms exceeded. Enter new value. Restart job

JDE called for more fonts and forms per page than were specified at installation. The job is being aborted.

Action	1.	Enter the JDE or DJDE command calling for a number of forms
		and fonts within range established at installation.
	2.	Restart the job.
OS2885	Max number of fonts exceeded.
	JDE called for more fonts per page than were specified at installation.
	The job is being aborted. The default FONTS value is 32.
Action	1.	Enter the JDE/DJDE command calling for a number of fonts
		within the range established at installation.
	2.	Restart the job.
OS2900	Input block length exceeds JDE max, do the following: * ABORT
	and RETRY, specifying another JDE/JDL
	A block was input exceeding the maximum block length specified by
	JDE. If the job is printed, text will be lost or misplaced.
Action	1.	Enter the ABORT I command.

2.Resend the job, specifying a JDE/JDL calling for greater block length.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-69