Xerox DocuPrint 96MX OS2055 Establishing communications with IOT, OS2060 Paper Tray 1 is empty

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2055 Establishing communications with IOT.

The OUTPUT task is establishing communication with the printer. Until communications are established, printer status information is not available.

Action None.

OS2056 Finished establishing communications with IOT.

The OUTPUT task has established communication with the printer.

Action None.

OS2060 Paper Tray 1 is empty.

The main feed tray is empty.

No paper remains in feed tray 1.

The printer control console displays one of the following:

BOTH TRAYS SET FOR _._X_._" PAPER

BOTH TRAYS SET FOR _X_MM PAPER

PAPER TRAY 1 IS EMPTY. TRAY 1 IS SET FOR _._X_._" PAPER

PAPER TRAY 1 IS EMPTY. TRAY 1 IS SET FOR _X_MM PAPER

PRINTER IS WARMING UP--PAPER TRAY 1 IS EMPTY-- PRESS i

Add paper to the main feeder tray. (Refer to the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

PRINTING--PAPER TRAY 1 IS EMPTY. BOTH TRAYS SET FOR _._X_._" PAPER

PRINTING--PAPER TRAY 1 IS EMPTY. BOTH TRAYS SET FOR _X_MM PAPER

READY TO PRINT--PAPER TRAY 1 IS EMPTY--PRESS i

TRAY 1 IS SET FOR _._X_._" PAPER. TRAY 2 IS SET FOR _._X_._" PAPER

TRAY 1 IS SET FOR _X_MM PAPER. TRAY 2 IS SET FOR _X_MM PAPER

Action	1.	Press i button on the printer control console for additional
		console messages if instructed to do so by the control console
		display.
	2.	Add paper to feeder tray 1. (Refer to the chapter on feeder
		trays in your DocuPrint 96/DocuPrint 96MX LPS Operator
		Guide.)
	3.	Press the <CON> key to resume printing.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-49