Xerox DocuPrint 96MX manual OS2070 Paper Tray 2 is empty, OS2080 Paper Tray x is empty

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2070 Paper Tray 2 is empty

No paper remains in feeder tray 2.

The printer control console displays one of the following:

BOTH TRAYS SET FOR _._X_._" PAPER

BOTH TRAYS SET FOR _X_MM PAPER

PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _._X_._" PAPER

PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _X_MM PAPER

PRINTER IS WARMING UP--PAPER TRAY 2 IS EMPTY-- PRESS i

Action Add paper to feeder tray 2. (Refer to the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR _._X_._" PAPER

PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR _X_MM PAPER

READY TO PRINT--PAPER TRAY 2 IS EMPTY--PRESS i

TRAY 1 IS SET FOR _._X_._" PAPER. TRAY 2 IS SET FOR _._X_._" PAPER

TRAY 1 IS SET FOR _X_MM PAPER. TRAY 2 IS SET FOR _X_MM PAPER

1.Press the i button on the printer control console for additional console messages if instructed to do so by the printer control console display. (Refer to the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

2.Add paper to feeder tray 2. (Refer to the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

3.Press the <CON> key to resume printing.

OS2080 Paper Tray x is empty.

The paper tray indicated in the message is empty, thus causing the printer to cycle down or preventing it from cycling up.

Action	1.	Add paper to the tray indicated.
	2.	Restart the job.

OS2090 Trays 1 or 2 must be used for transparencies.

Trays 1 or 2 must be specified (separately or in a cluster) in order to print your job on transparencies.

Action	1.	Reenter the command, specifying trays 1 or 2.
	2.	Enter the CONTINUE command to resume printing.

6-50 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE