Xerox DocuPrint 96MX manual OS2400 Printer misfeed detected. Check paper supply

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2400	Printer misfeed detected. Check paper supply.
	Paper was improperly fed from the main and/or auxiliary feeder tray,
	causing a jam condition.
Action	Release the feeder belt and check both feeder trays, removing any
	misfed paper. (Refer to the problem solving chapter in your
	DocuPrint 96/DocuPrint 96MX LPS Operator Guide.
OS2451	Requested bypass not on system. “CONT” defaults to bin. Enter
	Continue or Abort.
	A job with DESTINATION=EXPORT is being run on a printer with no
	Bypass Transport. Press CONTINUE to resume input processing, or
	abort the job if desired.
Action	None.
OS2452	Problem with segment separator save file.
	A problem has been encountered while accessing the separator
	page save file.
Action	None.
OS2453	Invalid font index number for printable string.
	The font index specified for the SNUMBER string on a separator
	page is invalid. Correct and rerun job.
Action	None.
OS2501	Black dry ink bottle is empty.
	The black primary dry ink bottle is empty.
Action	Replace bottle and resume printing.
OS2502	Color dry ink bottle is empty.
	The primary color dry ink bottle is empty.
Action	Replace bottle and resume printing.
OS2510	Color housing: not ready
	The color housing is not ready for the highlight color print job. This
	message is followed by the messages OS2680 PRINT QUALITY
	ADJUSTMENT IS REQUIRED FOR COLOR PRINTING and
	OS2670 ENTER PQA OR SUB INK COMMAND OR ABORT THE
	PRINT JOB.
Action	Perform a print quality adjustment (PQA) before using the color
	housing for color printing
	or
	Abort the job.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-57