Xerox DocuPrint 96MX manual IF7000, IF7100 Can‘t find IFUFSN.SYS resysgen and retry ADD

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF7000	** - WRITE LOCK PROTECTION ERROR - **
	A write operation could not be completed successfully, probably
	because the write ring is not present on the magnetic tape.
Action	1.	Put a write enable ring on the magnetic tape. (Refer to your
		DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)
	2.	Retry the command.

IF7100	Can‘t find IFUFSN.SYS; resysgen and retry ADD
	The IFUFSN.SYS file, which contains default font information, was
	not found on the system disk. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS System Generation Guide.)
Action	1.	If authorized to do so, resysgen.
	2.	Retry the ADD command.

IF7101	Font file x will not open
	The requested font file is not on the system.
Action	Copy the missing font onto the system.
IF7102	IPFNTS.SYS file will not open
	The IPFNTS.SYS file is not on the system.
Action	Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
	command.
IF7104	IPFNTS.SYS open error
	The system is unable to access the IPFNTS.SYS file.
Action	Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
	command.
IF7105	Output file will not open
	The medium specified (tape, disk, etc.) does not contain the external
	file requested
Action	Verify the file name and, if it exists on the medium, reenter the
	command. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
	Operations Reference chapter on managing LPS resources for
	additional information.)
IF7106	Print file will not open
	The IFU LIST command cannot open the .DAT print file to process.
	This is probably a disk error.
Action	1. Compress the disk and retry the command.

2.If the problem continues, contact your systems specialist or Xerox Customer Support.

5-26 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE