Xerox DocuPrint 96MX DSR disk save and restore command messages, DS2010 Mount and ready DSR tape

2.DSR (disk save and restore command) messages

	These messages may appear during the process of saving all disk
	files on tape or restoring all files to system disk from tape. (Refer to
	your DocuPrint 96/DocuPrint 96MX LPS Operations Reference
	chapter on managing LPS resources for additional information.)
DS1010	Save process complete
DS1020	DSR is saving disk drive 0.
DS1030	DSR is saving disk drive 1.
DS1040	DSR is saving disk drive 2.
DS1050	DSR is saving disk drive 3.
	The DSR command was entered. The system has completed
	backing-up system disk data on tape.
Action	None.
DS2010	Mount and ready DSR tape
	The DSR command was entered when no save tape had been
	mounted.
Action	Mount the save tape.
DS2020	Mount and ready DSR volume nnnn
	The DSR process requires more than one save tape. The system has
	encountered the EOV label.
Action	Mount the indicated tape volume.
DS3010	Invalid parameter...DSR aborted
	An incorrect density parameter was entered with the DSR command.
	The DSR task has terminated.
Action	Reenter the command as DSR or DSR 6250. No other parameters
	are accepted.
DS3020	DSR Version 2.0 unable to run on this configuration
	DSR version 2.0 is incompatible with the current printer
	configuration.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 2-1