Xerox DocuPrint 96MX 552 Can’t post Smcomm message, 554 Can’t set Terminal Emulation Mode timer

Models: DocuPrint 96MX

1 358
Download 358 pages 41.51 Kb
Page 275
Image 275

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

552 Can’t post SM_COMM message

Posting of the SM_COMM message to the application’s queue failed.

The communication with the system controller has not been initiated.

Action

1.

Ensure no other Microsoft Windows applications using the

 

 

communication ports are running.

 

2.

Select the OK header button to retry the process. If the problem

 

 

persists, call Xerox Customer Service.

553Can’t set communications state Configuring of the communication port failed.

Action

1.

Ensure no other Microsoft Windows applications using the

 

 

COM ports are running.

 

2.

Select the OK header button to retry the process. If the problem

 

 

persists, call Xerox Customer Service.

 

 

554

Can’t set Terminal Emulation Mode timer

 

The timer resource was not available for FTR. No further

 

communication with the system controller is possible.

Action

1.

Ensure no other Microsoft Windows applications are running.

2.Select the OK header button to retry the process. If the problem persists, call Xerox Customer Service.

555

Invalid communications id or unsupported mode

 

The port ID was not valid.

Action

Call Xerox Customer Service.

556Break detected while receiving from ESS

The communications driver detected the break signal on the RS232 line. The system controller was probably powered on or off, causing the command line to get “scrambled” for a while.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

557Clear To Send timeout

The Clear To Send timeout has been exceeded.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

 

 

558

Parallel device not selected

 

An attempt was made to communicate through the parallel port. The

 

user interface does not communicate through the parallel port.

Action

Select the OK header button to retry the process. If the problem

 

persists, call Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

15-5

Page 275
Image 275
Xerox DocuPrint 96MX 552 Can’t post Smcomm message, 554 Can’t set Terminal Emulation Mode timer, Clear To Send timeout